Additional Documents
Manuals, service information, technical references, catalogs, advertisements, and other McCulloch documents.
556 documents available
Looking for an Illustrated Parts List (IPL)? Search IPLs
Browse Documents
Manuals & Service Information 16
-
Eager Beaver / Mac 100 Series User Manual
-
Le Sabre Operating Manual (1956) - Unverified Reformatted Transcription
-
Mac 110/115/120/130/140 Owner’s Manual — 1982
-
Mac 110/120/130 Owner’s Manual — 1978
-
Mac 15 Owner’s Manual — 1963
-
Mac 3-10 & 3-10E Operating Instructions 65372
Document contributed by Rick Kardosh
Operating instructions: electric starting, compression release, ignition wiring, battery charging and manual starting. Courtesy of Rick Kardosh.
-
McCulloch Chain Saw Service Information — D-30 through 840
Service-manual extract covering the models listed in its opening table.
-
McCulloch Ignition Points Cleaning — Workshop Note
-
McCulloch PM1000 Service Reference
-
McCulloch Rod Bolt Substitute — Workshop Note
-
Mini Mac 832–839 and Mac Cat Operator’s Manual
-
Model 1-61 Owner’s Manual
-
Power Mac 310/320/330/340 Owner’s Manual
-
Power Mac 6 Owner’s Manual — 1973
-
Super 33 Operation and Maintenance Manual — June 1955
-
Super PM 610, Pro Mac 605/610 and Eager Beaver 3.7 — Operation, Maintenance and Safety
Service Bulletins 395
395 bulletins · All models
Bulletin number order, lowest first. A bulletin may cover more than one subject. Choose a model, then a subject, or browse either on its own. Subject counts reflect the selected model and search.
-
Service Bulletin 1000 — Fuel system modification to reduce lean-out and flooding
Document contributed by Parker Jameson
-
Service Bulletin 1001 — Starter base assembly procedure
Document contributed by Parker Jameson
-
Service Bulletin 1002 — Gearcase assembly modification for oiler push rod
Document contributed by Parker Jameson
-
Service Bulletin 1003 — Gearcase protectors: use two instead of one
Document contributed by Parker Jameson
-
Service Bulletin 1004 — Coils — revised test readings
Document contributed by Parker Jameson
-
Service Bulletin 1005 — Handle frame strengthening
Document contributed by Parker Jameson
-
Service Bulletin 1006 — Sprocket and drum assembly color coding
Document contributed by Parker Jameson
-
Service Bulletin 1007A — Starter rope reels and cutting lengths
Document contributed by Parker Jameson
Replaces Service Bulletin 1007.
-
Service Bulletin 1008 — Crankcase bottoms
Document contributed by Parker Jameson
-
Service Bulletin 1009 — Maintaining proper clutch adjustment
Document contributed by Parker Jameson
-
Service Bulletin 1010 — Condenser replacement
Document contributed by Parker Jameson
-
Service Bulletin 1011 — Plunge bow operation
Document contributed by Parker Jameson
-
Service Bulletin 1012 — Governor wire installation — brushcutter attachment
Document contributed by Parker Jameson
-
Service Bulletin 1012A — Improved governor wire installation — brushcutter
Document contributed by Parker Jameson
Improves the procedure in Service Bulletin 1012.
-
Service Bulletin 1013 — Installation of McCulloch sprocket, drum and bearing assemblies on competitive saws
Document contributed by Parker Jameson
-
Service Bulletin 1014 — Spark plug wire assemblies — improved wire
Document contributed by Parker Jameson
-
Service Bulletin 1015 — Bow saw oiler tank fitting — short shanks
Document contributed by Parker Jameson
-
Service Bulletin 1016 — Improved reed valve
Document contributed by Parker Jameson
-
Service Bulletin 1017 — Carburetor and governor assembly installation
Document contributed by Parker Jameson
-
Service Bulletin 1017A — Governor vane adjustment
Document contributed by Parker Jameson
Additional adjustment guidance for Service Bulletin 1017.
-
Service Bulletin 1018 — Improved chain oiler action
Document contributed by Parker Jameson
-
Service Bulletin 1019 — Condenser spring adjustment
Document contributed by Parker Jameson
-
Service Bulletin 1020 — Piston pin and bearing installation tool set
Document contributed by Parker Jameson
-
Service Bulletin 1022 — Carburetion — lean running and hard starting
Document contributed by Parker Jameson
-
Service Bulletin 1023 — Outboard handle and bars
Document contributed by Parker Jameson
Applies to all models covered by this bulletin except 5-49, 7-55 and 99.
-
Service Bulletin 1024 — Installation of stationary sawdust guard
Document contributed by Parker Jameson
-
Service Bulletin 1025 — Torque on cylinder head hold-down screws
Document contributed by Parker Jameson
-
Service Bulletin 1026 — Standardizing flywheel puller holes
Document contributed by Parker Jameson
-
Service Bulletin 1027 — Testing and priming the automatic chain oiler
Document contributed by Parker Jameson
-
Service Bulletin 1028 — Installation of clutch shoes and spring
Document contributed by Parker Jameson
-
Service Bulletin 1029 — Correcting a crankcase air leak
Document contributed by Parker Jameson
-
Service Bulletin 1030 — LUBRI-MAC operation, service and chain installation
Document contributed by Parker Jameson
-
Service Bulletin 1031 — Servicing the carburetor
Document contributed by Parker Jameson
-
Service Bulletin 1032 — Flywheel installation and removal
Document contributed by Parker Jameson
-
Service Bulletin 1032A — Correct flywheel removal
Document contributed by Parker Jameson
Additional flywheel removal guidance for Service Bulletin 1032.
-
Service Bulletin 1033 — Tightening cylinder head screws
Document contributed by Parker Jameson
-
Service Bulletin 1034 — Servicing the ball valve seat
Document contributed by Parker Jameson
-
Service Bulletin 1035 — Priming a primerless engine
Document contributed by Parker Jameson
-
Service Bulletin 1036 — Carburetor maintenance and condensate chain oiler
Document contributed by Parker Jameson
-
Service Bulletin 1037 — Identification of crankcase-cylinder assemblies
Document contributed by Parker Jameson
-
Service Bulletin 1038 — New oil pump spring
Document contributed by Parker Jameson
-
Service Bulletin 1039 — Improved carburetor sealing
Document contributed by Parker Jameson
-
Service Bulletin 1040 — Throttle push rod adjustment
Document contributed by Parker Jameson
-
Service Bulletin 1041 — Richer fuel mixture
Document contributed by Parker Jameson
-
Service Bulletin 1042 — Removing carburetor mounting bolts
Document contributed by Parker Jameson
-
Service Bulletin 1043 — Better frame brace clamp attachment
Document contributed by Parker Jameson
-
Service Bulletin 1044 — Carburetor improvements and gaskets
Document contributed by Parker Jameson
-
Service Bulletin 1045A — Coil testing — coils marked L8 and later
Document contributed by Parker Jameson
Replaces test specifications in Service Bulletin 1045.
-
Service Bulletin 1046 — Shock absorber for choke button
Document contributed by Parker Jameson
-
Service Bulletin 1047A — Elimination of incorrect ignition timing
Document contributed by Parker Jameson
Replaces Service Bulletin 1047.
-
Service Bulletin 1048 — Steel ball seat replacement
Document contributed by Parker Jameson
-
Service Bulletin 1049 — Installation of improved trigger pin
Document contributed by Parker Jameson
-
Service Bulletin 1050 — Fuel pickup filter replacement
Document contributed by Parker Jameson
-
Service Bulletin 1051 — Fan housing assembly — spark plug access hole modification
Document contributed by Parker Jameson
-
Service Bulletin 1052 — Starter assembly improvements
Document contributed by Parker Jameson
-
Service Bulletin 1053 — Fuel tank venting
Document contributed by Parker Jameson
-
Service Bulletin 1054 — Oversize pistons and rings
Document contributed by Parker Jameson
Replaces Service Bulletin 1021A. Later replaced by Service Bulletin 1127 and Service Bulletin 1190.
-
Service Bulletin 1055 — Gasket sets — model availability
Document contributed by Parker Jameson
-
Service Bulletin 1056 — Cleaning McCulloch carburetor filters
Document contributed by Parker Jameson
-
Service Bulletin 1057 — Starter rope fraying at anchor rivet
Document contributed by Parker Jameson
-
Service Bulletin 1058A — Spark plug performance
Document contributed by Parker Jameson
Replaces Service Bulletin 1058.
-
Service Bulletin 1059 — Crankcase cover interference causing air leakage
Document contributed by Parker Jameson
-
Service Bulletin 1060 — Removal and installation of fuel pickup wick
Document contributed by Parker Jameson
-
Service Bulletin 1061A — Servicing the fuel tank pressure vent valve
Document contributed by Parker Jameson
Replaces Service Bulletin 1061.
-
Service Bulletin 1062 — Crankshaft identification
Document contributed by Parker Jameson
-
Service Bulletin 1063 — Reworking 44-series fuel tank tops
Document contributed by Parker Jameson
-
Service Bulletin 1064 — Correct torque values
Document contributed by Parker Jameson
-
Service Bulletin 1065 — Factors contributing to marginal engine performance
Document contributed by Parker Jameson
-
Service Bulletin 1066 — Vented fuel cap
Document contributed by Parker Jameson
-
Service Bulletin 1067 — Clutch assembly improvements
Document contributed by Parker Jameson
-
Service Bulletin 1068 — Clutch nut washer replacement
Document contributed by Parker Jameson
-
Service Bulletin 1069 — Oil seal protector sleeve
Document contributed by Parker Jameson
-
Service Bulletin 1070 — Fuel system gaskets
Document contributed by Parker Jameson
-
Service Bulletin 1071 — Replacement of reed in reed plate assembly
Document contributed by Parker Jameson
-
Service Bulletin 1072 — Clutch adapter kit
Document contributed by Parker Jameson
-
Service Bulletin 1073 — Fuel tank vent tube
Document contributed by Parker Jameson
-
Service Bulletin 1074 — Clutch shoe damage
Document contributed by Parker Jameson
-
Service Bulletin 1075 — Coil test specifications
Document contributed by Parker Jameson
-
Service Bulletin 1076 — Correct clutch rotor replacement
Document contributed by Parker Jameson
-
Service Bulletin 1077A — New crankcase-cylinder assembly and crankshaft
Document contributed by Parker Jameson
Replaces Service Bulletin 1077.
-
Service Bulletin 1078 — New gearcase brace
Document contributed by Parker Jameson
-
Service Bulletin 1079 — Handle brace bolt
Document contributed by Parker Jameson
-
Service Bulletin 1080 — Spark plug wire assemblies
Document contributed by Parker Jameson
Replaces Service Bulletin 1014.
-
Service Bulletin 1081 — Chain oil leakage from bar mount interference
Document contributed by Parker Jameson
-
Service Bulletin 1082 — Availability of nameplate decals
Document contributed by Parker Jameson
-
Service Bulletin 1083 — New oiler push rod seal and seal retainer
Document contributed by Parker Jameson
-
Service Bulletin 1084 — Piston ring sets
Document contributed by Parker Jameson
-
Service Bulletin 1085 — Screw sizes and descriptions
Document contributed by Parker Jameson
Replaces Service Bulletin 123.
-
Service Bulletin 1086 — New closed-end bearing and piston pin
Document contributed by Parker Jameson
-
Service Bulletin 1086A — Closed-end bearing and piston pin — installation addendum
Document contributed by Parker Jameson
Addendum to Service Bulletin 1086.
-
Service Bulletin 1087 — Installation of throttle and choke plates
Document contributed by Parker Jameson
-
Service Bulletin 1088 — Flywheel and protector assembly
Document contributed by Parker Jameson
-
Service Bulletin 1089 — Gearcase mounting washers
Document contributed by Parker Jameson
-
Service Bulletin 1090 — Major part interchangeability
Document contributed by Parker Jameson
-
Service Bulletin 1091 — Cleaning breaker points
Document contributed by Parker Jameson
-
Service Bulletin 1092 — Capillary seal replacement
Document contributed by Parker Jameson
-
Service Bulletin 1093A — Replacement of reed plate assembly
Document contributed by Parker Jameson
Replaces Service Bulletin 1093.
-
Service Bulletin 1094 — New gearcase gasket
Document contributed by Parker Jameson
-
Service Bulletin 1095 — New coil and terminal assembly
Document contributed by Parker Jameson
-
Service Bulletin 1096 — Clutch retaining nut
Document contributed by Parker Jameson
-
Service Bulletin 1097 — Correct installation of starter drum 55871
Document contributed by Parker Jameson
-
Service Bulletin 1098 — Installing universal airbox assembly 57449A
Document contributed by Parker Jameson
-
Service Bulletin 1099 — Modifications required when installing carburetor 47393
Document contributed by Parker Jameson
-
Service Bulletin 1100 — Danger of installing the wrong bar adjusting screw
Document contributed by Parker Jameson
-
Service Bulletin 1101 — Puddle wick 57457 in third-port cavity
Document contributed by Parker Jameson
-
Service Bulletin 1102 — Correcting a sticking oiler pump
Document contributed by Parker Jameson
Body also identifies 1-70 and the 55 series.
-
Service Bulletin 1103 — Preventing 3.6:1 gear interference with gearcase
Document contributed by Parker Jameson
-
Service Bulletin 1104 — Removal of starter ratchet
Document contributed by Parker Jameson
Starter ratchet removal procedure. Complete four-page bulletin assembled from replacement scans and the previously retained continuation pages.
-
Service Bulletin 1105 — Protective parts added to plunge bow kit
Document contributed by Parker Jameson
One-page Bulletin 1105 separated from unrelated Bulletin 1104 continuation pages.
-
Service Bulletin 1106 — Preventing air leakage through fuel tank wick
Document contributed by Parker Jameson
-
Service Bulletin 1107 — Eliminating choke and oiler button swelling
Document contributed by Parker Jameson
-
Service Bulletin 1108 — Starter assembly 57117A
Document contributed by Parker Jameson
MC-6 and MC-10 applicability is for engines with starter kits installed.
-
Service Bulletin 1109 — Spark plug cover assembly 57565
Document contributed by Parker Jameson
-
Service Bulletin 1110 — Crankshaft identification
Document contributed by Parker Jameson
Includes MC-10 power-kit crankshaft identification.
-
Service Bulletin 1111 — Timing procedure
Document contributed by Parker Jameson
-
Service Bulletin 1112 — New steel breaker box cover
Document contributed by Parker Jameson
-
Service Bulletin 1113 — Transmission assemblies
Document contributed by Parker Jameson
-
Service Bulletin 1114 — Correct carburetor adjustment
Document contributed by Parker Jameson
-
Service Bulletin 1115 — Trouble maintaining carburetor adjustment
Document contributed by Parker Jameson
-
Service Bulletin 1116 — Removing pitch from chain saws
Document contributed by Parker Jameson
-
Service Bulletin 1117 — New fuel tank assembly 57475
Document contributed by Parker Jameson
-
Service Bulletin 1118 — Carburetor body assembly 55361B
Document contributed by Parker Jameson
-
Service Bulletin 1119 — Transmission-to-crankcase-cover shim
Document contributed by Parker Jameson
Revision of Service Bulletin 224.
-
Service Bulletin 1120 — Wrong Woodruff key in parts envelope
Document contributed by Parker Jameson
-
Service Bulletin 1121 — Cylinder head gaskets
Document contributed by Parker Jameson
-
Service Bulletin 1122 — New starter ratchet and starter drum
Document contributed by Parker Jameson
Kart engine applicability requires the specified starter kit.
-
Service Bulletin 1123 — Eliminating ignition trouble
Document contributed by Parker Jameson
-
Service Bulletin 1124 — Change in breaker point configuration
Document contributed by Parker Jameson
-
Service Bulletin 1125 — Installing flywheel 28345
Document contributed by Parker Jameson
Flywheel instructions for 3-25 with an illustrated parts table covering 3-25, 4-30, 4-30A, 47 and 73.
-
Service Bulletin 1126 — Mottled appearance of new pistons
Document contributed by Parker Jameson
-
Service Bulletin 1127 — Oversize pistons and rings
Document contributed by Parker Jameson
Replaces Service Bulletin 1054. Includes piston and ring dimension tables.
-
Service Bulletin 1128A — Preventing stalling and power loss due to fuel puddling
Document contributed by Parker Jameson
Replaces Service Bulletin 1128.
-
Service Bulletin 1129 — Preventing stalling and power loss due to fuel puddling
Document contributed by Parker Jameson
-
Service Bulletin 1130 — Timing new rounded-point breaker points
Document contributed by Parker Jameson
-
Service Bulletin 1131 — Testing high-output coils
Document contributed by Parker Jameson
-
Service Bulletin 1132 — Stronger airbox handle 55986
Document contributed by Parker Jameson
-
Service Bulletin 1133 — Spark plug cleaning
Document contributed by Parker Jameson
-
Service Bulletin 1134A — Fuel tank attaching screws
Document contributed by Parker Jameson
Replaces Service Bulletin 1134.
-
Service Bulletin 1135 — Piston and cylinder head gasket interference
Document contributed by Parker Jameson
-
Service Bulletin 1136A — Keeping service material available for quick reference
Document contributed by Parker Jameson
Replaces Service Bulletin 1136.
-
Service Bulletin 1138 — A possible cause of high speed lean-out
Document contributed by Parker Jameson
Applies to the listed models/series with the specified replacement carburetors.
-
Service Bulletin 1139 — Importance of maintaining screw torque values
Document contributed by Parker Jameson
-
Service Bulletin 1140 — Heavy duty fuel pump diaphragm 53164
Document contributed by Parker Jameson
-
Service Bulletin 1141 — Crankcase cover seal installation
Document contributed by Parker Jameson
-
Service Bulletin 1142 — Fuel cap vent springs
Document contributed by Parker Jameson
-
Service Bulletin 1143 — Correct piston ring types for two-cycle engines
Document contributed by Parker Jameson
-
Service Bulletin 1144 — Sprocket pitch change for more efficient operation
Document contributed by Parker Jameson
-
Service Bulletin 1145 — Correcting difficulties in carburetor adjustment
Document contributed by Parker Jameson
-
Service Bulletin 1146 — Installing throttle lock kit 57618
Document contributed by Parker Jameson
-
Service Bulletin 1147 — New warranty procedure
Document contributed by Parker Jameson
-
Service Bulletin 1148 — Adjusting the speed governor
Document contributed by Parker Jameson
-
Service Bulletin 1149 — Reshaping throttle pushrod to avoid choke return spring damage
Document contributed by Parker Jameson
-
Service Bulletin 1150 — Water trapped in fuel caps
Document contributed by Parker Jameson
-
Service Bulletin 1151 — Correct analysis of engine malfunction
Document contributed by Parker Jameson
-
Service Bulletin 1152 — Optional 2:1 gear set 57997
Document contributed by Parker Jameson
-
Service Bulletin 1153 — Screw sizes and descriptions
Document contributed by Parker Jameson
Replaces Service Bulletin 1085.
-
Service Bulletin 1154 — Coil test specifications
Document contributed by Parker Jameson
Superseded by Service Bulletin 1181, June 13, 1962.
-
Service Bulletin 1155 — Faulty ignition shutoff switch on brush cutter and weed cutter drive units
Document contributed by Parker Jameson
-
Service Bulletin 1156 — Starter assembly 55129C
Document contributed by Parker Jameson
-
Service Bulletin 1157 — Installing Speed Tip bar repair kit 56700
Document contributed by Parker Jameson
-
Service Bulletin 1158 — Nameplate decals available for service replacement
Document contributed by Parker Jameson
Replaces Service Bulletin 1082.
-
Service Bulletin 1159 — Installing ignition switch assembly 58387
Document contributed by Parker Jameson
-
Service Bulletin 1161 — Chain breaker replacement bushing 56801
Document contributed by Parker Jameson
-
Service Bulletin 1162 — Crankcase cover 57768A
Document contributed by Parker Jameson
-
Service Bulletin 1165 — Crankcase covers 57126 and 57126A
Document contributed by Parker Jameson
Cover 57126 must not be used on MC-2 or MC-7; those models require 57126A.
-
Service Bulletin 1168 — Servicing fuel cap 55934A
Document contributed by Parker Jameson
Factory scope: 1-52 and larger; applies to fuel cap 55934A. Unspecified larger models have not been inferred.
-
Service Bulletin 1174 — Needle bearing and bushing kit 53334
Document contributed by Parker Jameson
-
Service Bulletin 1176 — New torque value for 10-32 connecting rod screws
Document contributed by Parker Jameson
-
Service Bulletin 1179 — New cylinder and crankcase 58551 and reed plate 57656B
Document contributed by Parker Jameson
Replacement for 1-92; assembly 58551 is also used on 1-93. Additional reed plate requirement is specific to 1-92.
-
Service Bulletin 1181 — Coil test specifications and checking the tester
Document contributed by Parker Jameson
Replaces Service Bulletin 1154.
-
Service Bulletin 1184 — Incorrect primer rod adjustment causes carburetor trouble
Document contributed by Parker Jameson
-
Service Bulletin 1185 — Use of protector plates 51632B
Document contributed by Parker Jameson
-
Service Bulletin 1187 — Repairing AUTO-MAC bar nose sprockets
Document contributed by Parker Jameson
-
Service Bulletin 1188 — Check valve 51982A
Document contributed by Parker Jameson
51982A replaces earlier check valve 51982. Additional named service applications require the tank-type oiler housing illustrated in Figure 3; replace inlet tube, remove original spring and ball, and replace pipe plug with 104869. Do not infer unnamed models from shared parts.
-
Service Bulletin 1189 — An occasional cause of leaking reed valves
Document contributed by Parker Jameson
-
Service Bulletin 1190 — Cylinder, piston and ring chart
Document contributed by Parker Jameson
Cylinder, piston and ring dimensions, oversize parts and reboring guidance for chain saw and kart engines. Replaces Service Bulletin 1054 and Service Bulletin 1127. See Service Bulletin 1190A for corrected ring end-gap guidance.
-
Service Bulletin 1190A — Addendum to Bulletin 1190: piston ring end gap
Document contributed by Parker Jameson
Addendum to Service Bulletin 1190. Ring type determines which specification applies.
-
Service Bulletin 1191 — Improving switch button action
Document contributed by Parker Jameson
-
Service Bulletin 1192 — Precautions when installing AUTO-MAC bars
Document contributed by Parker Jameson
-
Service Bulletin 1193 — Illustrated parts list corrections
Document contributed by Parker Jameson
1-76: correct IPL 53464 page 13 carburetor body assembly 53592 contents. 1-86: correct IPL 53486 page 7 clutch shoe 53694 listing to four units, rather than a set-of-four description. These corrections are model-specific, not both applied to both models.
-
Service Bulletin 1196 — Improved clutch guard 53542A
Document contributed by Parker Jameson
Improved assembly 53542A replaces 53542; includes new guard and adjusting screw and revised locknut/washer arrangement.
-
Service Bulletin 1197 — Venting fuel tank 53553
Document contributed by Parker Jameson
Introduces vented cap 55934A and tank 53553A; explains restoring tank vent parts when retaining an unvented cap, and removing tank venting/replugging when switching to a vented cap.
-
Service Bulletin 1198 — Currently available illustrated parts lists
Document contributed by Parker Jameson
September 1962 index of available IPLs and manuals for the models listed; this bulletin is a publication index, not the individual IPLs.
-
Service Bulletin 1199 — Lean-out: possible causes and corrections
Document contributed by Parker Jameson
Four possible causes: vapor lock/inlet needle, defective fuel pickup hose, fuel pump gasket interference, and expansion plug interference. Also check pickup movement against tank liner/gasket.
-
Service Bulletin 1476 — Servicing original equipment manufacturer products
Document contributed by Parker Jameson
OEM applications and servicing/warranty arrangements for the listed McCulloch power units.
-
Service Bulletin 1476 — 797 and Super 797 parts differences
Document contributed by Parker Jameson
-
Service Bulletin 1477 — New starter drum, starter spring, spring shield and fan housing
Document contributed by Parker Jameson
-
Service Bulletin 1478 — Air filter, p/n 69922
Document contributed by Parker Jameson
-
Service Bulletin 1479 — Adjustment of automatic oiler
Document contributed by Parker Jameson
-
Service Bulletin 1480 — Carburetor fuel pump diaphragm
Document contributed by Parker Jameson
-
Service Bulletin 1481 — Fixed high speed jet carburetor
Document contributed by Parker Jameson
-
Service Bulletin 1482 — Warranty - flat rate labor schedule
Document contributed by Parker Jameson
-
Service Bulletin 1483 — Starter dust shields and retaining rings
Document contributed by Parker Jameson
-
Service Bulletin 1484 — D.s.p. operation
Document contributed by Parker Jameson
-
Service Bulletin 1487 — Spark arrester screens
Document contributed by Parker Jameson
-
Service Bulletin 1488 — Improvements and additions
Document contributed by Parker Jameson
-
Service Bulletin 1489 — Torque on carburetor hold-down screws
Document contributed by Parker Jameson
-
Service Bulletin 1490 — Parts changes and additions
Document contributed by Parker Jameson
-
Service Bulletin 1491 — Alternate spark plugs
Document contributed by Parker Jameson
-
Service Bulletin 1495 — SPARK ARRESTER BAFFLE KIT (Fine Mesh Screen)
Document contributed by Parker Jameson
-
Service Bulletin 1497 — Chain oiler leaks, sprocket bushing wear
Document contributed by Parker Jameson
-
Service Bulletin 1498 — Carburetor service & troubleshooting
Document contributed by Parker Jameson
-
Service Bulletin 1499 — Low lead and lead free gasoline
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1500 — Chrome-bore cylinders - caution
Document contributed by Parker Jameson
-
Service Bulletin 1501 — Carburetor flooding
Document contributed by Parker Jameson
-
Service Bulletin 1502 — Bracket kit screws, ignition switch
Document contributed by Parker Jameson
-
Service Bulletin 1503 — Carburetor lever setting and adjustment
Document contributed by Parker Jameson
-
Service Bulletin 1506 — Super pro 80 clutch installation
Document contributed by Parker Jameson
-
Service Bulletin 1507 — Throttle linkage
Document contributed by Parker Jameson
-
Service Bulletin 1508 — Crankshaft & clutch nut - left - hand thread
Document contributed by Parker Jameson
-
Service Bulletin 1509 — General service information
Document contributed by Parker Jameson
Cover bulletin only. The referenced General Service Information SI 38 enclosure is not present in this scan.
-
Service Bulletin 1510 — Timing procedures
Document contributed by Parker Jameson
-
Service Bulletin 1511 — Manual Oiler Check Valve, P/N 86438
Document contributed by Parker Jameson
-
Service Bulletin 1512 — Carburetor mixture needles
Document contributed by Parker Jameson
-
Service Bulletin 1513 — Flywheel, p/n 61737a, replaced by p/n 84681
Document contributed by Parker Jameson
-
Service Bulletin 1515 — Automatic oiler instructions
Document contributed by Parker Jameson
-
Service Bulletin 1516 — Bar misalignment
Document contributed by Parker Jameson
-
Service Bulletin 1517 — Pressure test adapters, dsp plug screw
Document contributed by Parker Jameson
-
Service Bulletin 1519 — Clutch installation do not use impact wrench
Document contributed by Parker Jameson
-
Service Bulletin 1520 — Identification of Transmission Parts
Document contributed by Parker Jameson
-
Service Bulletin 1522 — Oiler rod and piston misalignment
Document contributed by Parker Jameson
-
Service Bulletin 1523 — Sprocket change
Document contributed by Parker Jameson
-
Service Bulletin 1524 — Excessive engine r.p.m
Document contributed by Parker Jameson
-
Service Bulletin 1525 — Rivet tool and rope installation
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1526 — Clutch nut torque
Document contributed by Parker Jameson
-
Service Bulletin 1527 — High speed jet carburetor, p/n 87288
Document contributed by Parker Jameson
-
Service Bulletin 1528 — Stop switch wire assembly
Document contributed by Parker Jameson
-
Service Bulletin 1529 — Adapting the sp 80 for the pro mac bar
Document contributed by Parker Jameson
-
Service Bulletin 1530 — Stator terminal short circuits
Document contributed by Parker Jameson
-
Service Bulletin 1531 — Bar bolt installation
Document contributed by Parker Jameson
-
Service Bulletin 1532 — Valve wrench
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1533 — Clutch change
Document contributed by Parker Jameson
-
Service Bulletin 1534 — Clutch change
Document contributed by Parker Jameson
-
Service Bulletin 1535 — Serial numbers prefixed 15
Document contributed by Parker Jameson
-
Service Bulletin 1536 — Repairing stripped cylinder/crankcase threads for fan housing hold-down screws
Document contributed by Parker Jameson
-
Service Bulletin 1537 — Fuel hose installation
Document contributed by Parker Jameson
-
Service Bulletin 1538 — Silastic 732 RTV crankcase sealant
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1539 — Pulse pump gasket
Document contributed by Parker Jameson
-
Service Bulletin 1541 — Improved fuel hose
Document contributed by Parker Jameson
-
Service Bulletin 1542 — Parts changes and specifications
Document contributed by Parker Jameson
-
Service Bulletin 1543 — Mini Mac fuel-hose service request
Document contributed by Parker Jameson
-
Service Bulletin 1544 — SERVICING O.E.M. (Original Equipment Manufacturer) PRODUCTS
Document contributed by Parker Jameson
OEM applications and servicing/warranty arrangements for the listed McCulloch power units.
-
Service Bulletin 1545 — Mini-mac "e-z fix" starter
Document contributed by Parker Jameson
-
Service Bulletin 1546 — Boot and shroud combinations
Document contributed by Parker Jameson
-
Service Bulletin 1547 — Pro Mac 60 manufacturing level change
Document contributed by Parker Jameson
-
Service Bulletin 1548 — Fuel hose kit 90661
Document contributed by Parker Jameson
-
Service Bulletin 1549 — Removing Tank Assembly
Document contributed by Parker Jameson
-
Service Bulletin 1550 — Gasoline-to-oil mixture ratio
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1551 — Carburetors, Repair Kits, and Parts Changes
Document contributed by Parker Jameson
-
Service Bulletin 1552 — New parts and service specifications
Document contributed by Parker Jameson
-
Service Bulletin 1553 — Fixed high-speed jet carburetors
Document contributed by Parker Jameson
-
Service Bulletin 1555 — Clutch guard clearance
Document contributed by Parker Jameson
-
Service Bulletin 1556 — Crankcase, oil pulse pump and gasket changes
Document contributed by Parker Jameson
-
Service Bulletin 1557 — Use of oil plate 90654
Document contributed by Parker Jameson
-
Service Bulletin 1558 — Recommended Engine Stopping Procedure
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1559 — Oil pickup hose - sealing
Document contributed by Parker Jameson
-
Service Bulletin 1560 — New throttle rod clip
Document contributed by Parker Jameson
-
Service Bulletin 1561 — Fuel Cap Venting With All Weather Cover
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1562 — Manufacturing level change
Document contributed by Parker Jameson
-
Service Bulletin 1563 — Improved venting fuel/oil cap 90922
Document contributed by Parker Jameson
-
Service Bulletin 1564 — Carburetor high-speed jets
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1565 — Mini Mac fuel-hose replacement service program
Document contributed by Parker Jameson
Fuel-hose replacement notice. Referenced sample postcard, dealer letter and news release are not present in this scan.
-
Service Bulletin 1566 — New Mac 6 Bars
Document contributed by Parker Jameson
-
Service Bulletin 1567 — Sprocket and Drum Kit, P/N 90150, Bearing Installation Change
Document contributed by Parker Jameson
-
Service Bulletin 1568 — Build Changes
Document contributed by Parker Jameson
-
Service Bulletin 1569 — Improved Mini-Mac fuel filter/pickup
Document contributed by Parker Jameson
-
Service Bulletin 1570 — Improved oil pump gasket 83187
Document contributed by Parker Jameson
-
Service Bulletin 1571 — Piston Assembly Changes
Document contributed by Parker Jameson
-
Service Bulletin 1572 — Installing New T-Shaped Fuel Filter
Document contributed by Parker Jameson
-
Service Bulletin 1573 — Torque For Pump Mounting Screw
Document contributed by Parker Jameson
-
Service Bulletin 1574 — Improved throttle trigger
Document contributed by Parker Jameson
-
Service Bulletin 1575 — Carburetor high-speed jet change
Document contributed by Parker Jameson
-
Service Bulletin 1576 — Drum and floating rim sprocket kits
Document contributed by Parker Jameson
-
Service Bulletin 1577 — New warranty and registration card
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1578 — Manual and automatic oil pump mounting screw torques
Document contributed by Parker Jameson
-
Service Bulletin 1579 — Clutch protector plate
Document contributed by Parker Jameson
-
Service Bulletin 1580 — Sprocket Bearing Kit
Document contributed by Parker Jameson
-
Service Bulletin 1581 — Starter Handle Kit
Document contributed by Parker Jameson
-
Service Bulletin 1582 — Advance Idle Screw
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1583 — Temporary tooling for H-series generator rotor removal
Document contributed by Parker Jameson
-
Service Bulletin 1585 — Servicing and Warranty
Document contributed by Parker Jameson
OEM applications and servicing/warranty arrangements for the listed McCulloch power units.
-
Service Bulletin 1586 — Muffler screws, drill accessories, 7-10A build changes, generators and kart engine parts
Document contributed by Parker Jameson
-
Service Bulletin 1587 — Instructions for warranty request/repair order form 91416
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1588 — TOOL - New Tachometer Available
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1589 — Written warranty improvements and changes
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1590 — Vented fuel tanks and replacement fuel caps
Document contributed by Parker Jameson
-
Service Bulletin 1591 — Service wrenches, starter pulley, cam wiper, fuel hose and Mini Mac 35 IPL correction
Document contributed by Parker Jameson
-
Service Bulletin 1592 — "EARLY WARNING SYSTEM" and CARBURETION
Document contributed by Parker Jameson
-
Service Bulletin 1593 — Fuel pickup hose kit 91509
Document contributed by Parker Jameson
-
Service Bulletin 1594 — Bar Spacer Plates Kit, P/N 92020
Document contributed by Parker Jameson
-
Service Bulletin 1595 — Breaker Box, P/N 84329
Document contributed by Parker Jameson
-
Service Bulletin 1596 — SDC, Walbro Carburetors
Document contributed by Parker Jameson
-
Service Bulletin 1597 — MDC 9 carburetor and MDC 11 replacement kit
Document contributed by Parker Jameson
-
Service Bulletin 1598 — Ignition coil ground wire
Document contributed by Parker Jameson
-
Service Bulletin 1599 — Clutch drum modification for improved chain brake installation
Document contributed by Parker Jameson
-
Service Bulletin 1600 — Serial Number Prefix (14-) Improvements
Document contributed by Parker Jameson
-
Service Bulletin 1601 — 1. Air Filter Cover and Shroud Assembly for Mini Mac 25, 30, and 35. 2. Special Service Cylinders for Mini Mac Hedgetrimmer & Drill Attachment
Document contributed by Parker Jameson
-
Service Bulletin 1602 — Manual oiler replacement kits
Document contributed by Parker Jameson
-
Service Bulletin 1603 — Fuel/oil mixture and matched piston/cylinder assemblies
Document contributed by Parker Jameson
-
Service Bulletin 1604 — Dixson tachometer and factory operating-speed specifications
Document contributed by Parker Jameson
-
Service Bulletin 1605 — Automatic oil pump sealing and parts corrections
Document contributed by Parker Jameson
-
Service Bulletin 1606 — Piston assembly tool kit and pressure-test tool
Document contributed by Parker Jameson
-
Service Bulletin 1607 — Super Pro 125C model 600076: prefix 14 changes
Document contributed by Parker Jameson
-
Service Bulletin 1608 — 7-10 Automatic model 600052: prefix 16 changes
Document contributed by Parker Jameson
-
Service Bulletin 1609 — l. Service Replacement Connecting Rod Assemblies 2. Automatic Oiler Pad
Document contributed by Parker Jameson
-
Service Bulletin 1610 — Kart engine warning: not for man-carrying aircraft
Document contributed by Parker Jameson
-
Service Bulletin 1611 — 1. Crankcase Assemblies, P/N 83454A and P/N 83454. 2. Addendum, P/N 92849
Document contributed by Parker Jameson
-
Service Bulletin 1612 — Low Power
Document contributed by Parker Jameson
-
Service Bulletin 1613 — Power Mac 6 Automatic model 600088: prefix 12 changes
Document contributed by Parker Jameson
-
Service Bulletin 1614 — Mini Mac 35 Auto Sharp model 600097: prefix 11 changes
Document contributed by Parker Jameson
-
Service Bulletin 1615 — Auto Sharp bracket installation
Document contributed by Parker Jameson
-
Service Bulletin 1616 — Super Pro 40 model 600082: prefix 13 changes
Document contributed by Parker Jameson
-
Service Bulletin 1617 — Mini Mac 25/30 model 600093: prefix 14 changes
Document contributed by Parker Jameson
-
Service Bulletin 1618 — Sprocket-tip lubrication
Document contributed by Parker Jameson
-
Service Bulletin 1619 — Generator stator washers
Document contributed by Parker Jameson
-
Service Bulletin 1620 — Spark plug and compression-release valve wrenches
Document contributed by Parker Jameson
-
Service Bulletin 1621 — Super Pro 70 model 600443: prefix 12 changes
Document contributed by Parker Jameson
-
Service Bulletin 1622 — Super Pro 81 model 600438: prefix 15 changes
Document contributed by Parker Jameson
-
Service Bulletin 1623 — 7-10 Automatic model 600052: prefix 16/17 changes
Document contributed by Parker Jameson
-
Service Bulletin 1624 — Pro 10-10 Automatic model 600013: prefix 13 changes
Document contributed by Parker Jameson
-
Service Bulletin 1625 — Pro Mac 55 model 600031: prefix 13 changes
Document contributed by Parker Jameson
-
Service Bulletin 1626 — Automatic oiler seal kit, bearings and Mini Pro bar
Document contributed by Parker Jameson
-
Service Bulletin 1627 — 1. Flywheel Nut Torque, Mini Mac Series, PM-6, SP 40. 2. Auto Sharp AS370G Parts Information
Document contributed by Parker Jameson
-
Service Bulletin 1628 — Proper Starter Alignment
Document contributed by Parker Jameson
-
Service Bulletin 1629 — Capacitor Discharge Ignition (CDI)
Document contributed by Parker Jameson
-
Service Bulletin 1630 — Super Pro 125C model 600076: prefix 15 changes
Document contributed by Parker Jameson
-
Service Bulletin 1632 — 1. Ignition Switch Kit, P/N 92649 2. Correct CHAIN BRAKE Assembly on 13-level
Document contributed by Parker Jameson
-
Service Bulletin 1633 — 1. Breaker Box Kit, P/N 91852 2. Generator Pricing Information
Document contributed by Parker Jameson
-
Service Bulletin 1634 — 1. PM 370G Chain Pricing and General Information 2. Stator Information
Document contributed by Parker Jameson
-
Service Bulletin 1635 — 1. Short Block Assemblies 2. SP 40 Metering Diaphragm Assembly 3. Scrench Price Information
Document contributed by Parker Jameson
-
Service Bulletin 1636 — CHAIN BRAKE Installation Addendum (S.1. 101
Document contributed by Parker Jameson
-
Service Bulletin 1637 — Problem caused by reed/reed stop removal
Document contributed by Parker Jameson
-
Service Bulletin 1641 — Mac 110/120 model 600016: prefix 11 changes
Document contributed by Parker Jameson
-
Service Bulletin 1642 — Mac 130 model 600017: prefix 11 changes
Document contributed by Parker Jameson
-
Service Bulletin 1643 — Mac 140 model 600022: prefix 11 changes
Document contributed by Parker Jameson
-
Service Bulletin 1644 — Pro Mac 555 model 600033: prefix 11 changes
Document contributed by Parker Jameson
-
Service Bulletin 1645 — Pro Mac 850 model 600439: prefix 13 changes
Document contributed by Parker Jameson
-
Service Bulletin 1646 — Pro Mac 510 model 600018: prefix 11 changes
Document contributed by Parker Jameson
-
Service Bulletin 1647 — Pro Mac 10-10 model 600014: prefix 11 changes
Document contributed by Parker Jameson
-
Service Bulletin 1648 — Clutch assembly, DSP valve, sprocket kits and starter handle
Document contributed by Parker Jameson
-
Service Bulletin 1649 — Mac 110/120/130/140 and Pro Mac 510 chain brake service and specifications
Document contributed by Parker Jameson
-
Service Bulletin 1650 — CHAIN BRAKE Service Information
Document contributed by Parker Jameson
-
Service Bulletin 1651 — 1. Mac 10-10, 10-10A IPL, P/N 92374 2. 7-10 Power Unit (OEM) IPL, P/N 92372 3. Mac 140 600022S (11-) 4. Changes to Chains, Bars, and Accessories Catalogue, ADV 190397 5. Bracket Kit, P/N 83204 6. Generator Propane Gas Conversion Kits
Document contributed by Parker Jameson
-
Service Bulletin 1652 — Service Procedures for Electronic Ignition Assembly, P/N 92785
Document contributed by Parker Jameson
-
Service Bulletin 1653 — Pro Mac 700 model 600061: prefix 12 changes
Document contributed by Parker Jameson
-
Service Bulletin 1655 — Pro Mac 10-10 model 600014: prefix 12 changes
Document contributed by Parker Jameson
-
Service Bulletin 1656 — Pro Mac 555 model 600033: prefix 12 changes
Document contributed by Parker Jameson
-
Service Bulletin 1657 — Pro Mac 850 model 600439: prefix 14 changes
Document contributed by Parker Jameson
-
Service Bulletin 1658 — Zama C-2 carburetor, sharpening tools, oil pump and piston rings
Document contributed by Parker Jameson
-
Service Bulletin 1659 — RA/RC generator literature and service tools
Document contributed by Parker Jameson
-
Service Bulletin 1660 — Pro Mac 510 model 600018: prefix 13 changes
Document contributed by Parker Jameson
-
Service Bulletin 1661 — Piston assembly, carburetor, 7-10 IPL and throttle-trigger changes
Document contributed by Parker Jameson
-
Service Bulletin 1663 — Model Numbers 600041 (11-) and 600046 (11-)
Document contributed by Parker Jameson
-
Service Bulletin 1666 — Parts pricing, spark plug thread repair, flywheel, IPL and trigger-release changes
Document contributed by Parker Jameson
-
Service Bulletin 1667 — Starter drums and pawls
Document contributed by Parker Jameson
-
Service Bulletin 1668 — Power Mac 310/320/340: prefix 11 changes
Document contributed by Parker Jameson
-
Service Bulletin 1670 — Clutch kits and Pro Mac 610/650 parts pricing
Document contributed by Parker Jameson
-
Service Bulletin 1672 — Mac 110/120 model 600016: prefix 12 changes
Document contributed by Parker Jameson
-
Service Bulletin 1673 — Pro Mac 610/650 manufacturing changes and IPL update
Document contributed by Parker Jameson
-
Service Bulletin 1674 — Power Mac 300 series manufacturing changes and IPL update
Document contributed by Parker Jameson
-
Service Bulletin 1675 — Pro Mac 610/650 throttle rod and DSP washer
Document contributed by Parker Jameson
-
Service Bulletin 1676 — Power Mac 300 ring set, warranty and IPL correction
Document contributed by Parker Jameson
-
Service Bulletin 1677 — Sprocket bearing, starter, choke kit and Pro Mac 610/650 IPL corrections
Document contributed by Parker Jameson
-
Service Bulletin 1678 — Mac 110/120 model 600016: prefix 13 changes
Document contributed by Parker Jameson
-
Service Bulletin 1680 — Piston assemblies with grease-retained bearings
Document contributed by Parker Jameson
Date follows the handwritten year correction on the source: January 1, 1979.
-
Service Bulletin 1681 — Loose Parts and Printed Material Supplied with Current Model
Document contributed by Parker Jameson
-
Service Bulletin 1683 — Pro Mac 610/650 service starter assembly
Document contributed by Parker Jameson
-
Service Bulletin 1684 — RA 330A generator labor schedule and microform readers
Document contributed by Parker Jameson
-
Service Bulletin 1685 — Power Mac 300 bar spacer and throttle-trigger screw
Document contributed by Parker Jameson
-
Service Bulletin 1686 — Muffler Kit, P/N 95318, and Screen Cover Kit, P/N 95320
Document contributed by Parker Jameson
-
Service Bulletin 1688 — Power Mac 310/320/340 fuel tank vented-cap program
Document contributed by Parker Jameson
-
Service Bulletin 1689 — Pro Mac 610/650 starter replacement program
Document contributed by Parker Jameson
-
Service Bulletin 1690 — Pro Mac 510 model 600018: prefix 14 changes
Document contributed by Parker Jameson
-
Service Bulletin 1691 — McCulloch microfiche system expansion
Document contributed by Parker Jameson
General service, tools or administration information; no individual saw model is specified.
-
Service Bulletin 1693 — Pro Mac 600 series air filter
Document contributed by Parker Jameson
-
Service Bulletin 1694 — Pro Mac 610/650 carburetor changes
Document contributed by Parker Jameson
-
Service Bulletin 1695 — Pro Mac 610/650 Walbro carburetor, flywheel and pawl changes
Document contributed by Parker Jameson
-
Service Bulletin 1696 — Pro Mac 850 ignition, piston and diaphragm kits
Document contributed by Parker Jameson
-
Service Bulletin 1699 — Starter cover, warranty forms and sprocket/drum assembly
Document contributed by Parker Jameson
-
Service Bulletin 1704 — Power Mac 300 series: prefix 12 build changes
Document contributed by Parker Jameson
-
Service Bulletin 1705 — Carburetor assembly, p/n 95763 (zama c-2s)
Document contributed by Parker Jameson
-
Service Bulletin 1706 — Build level change
Document contributed by Parker Jameson
-
Service Bulletin 1707 — Stocking and pricing information
Document contributed by Parker Jameson
-
Service Bulletin 1708 — Parts pricing, bar adjustment screw and replacement cylinders
Document contributed by Parker Jameson
-
Service Bulletin 1709 — Power Mac 300 cylinder/crankcase fastener conversion (5 mm to 6 mm)
Document contributed by Parker Jameson
Includes the three scanned pages of Service Information 183 (December 1980). The bottom-shroud procedure appears to stop mid-instruction; a possible continuation is missing.
-
Service Bulletin 1711 — Fuel hose assembly, p/n 94899, air leaks
Document contributed by Parker Jameson
-
Service Bulletin 1712 — Power Mac 300 modification program
Document contributed by Parker Jameson
Includes the modification instructions (SI 195) and program supplement.
-
Service Bulletin 1713 — Electramac Type 1 safety recall notice
Document contributed by Parker Jameson
Historical 1981 recall notice. Referenced service-center list, customer letter and news release are not present in this scan.
-
Service Bulletin 1714 — Low kickback chain
Document contributed by Parker Jameson
-
Service Bulletin 1715 — Auto Sharp assembly status update
Document contributed by Parker Jameson
-
Service Bulletin 1716 — Manufacturing changes
Document contributed by Parker Jameson
-
Service Bulletin 1717 — Electramac model introduction
Document contributed by Parker Jameson
-
Service Bulletin 1719 — Mac 60/70/80/95 string trimmers: prefix 12 changes
Document contributed by Parker Jameson
-
ABC Service bulletins - Oct 1954 to May 1957
-
Servicing OEM Products — Service Bulletin 1544, August 1973
Carburetor Information 67
-
Application & Description S-604 7-83
Tillotson application and description reference; publication S-604.
-
HDAseries
Walbro HDA carburetor service manual.
-
Mac 10 Carburetor Identification and Reference
-
Setting Up a Two-Cycle Tillotson Carburetor — Workshop Note
-
Tillotson AJ-Series-Parts-List
-
Tillotson Carburetor Rebuilding — Workshop Notes
-
Tillotson Double Fuel Pump Conversion — Workshop Note
-
Tillotson E-Series-Parts-List
-
Tillotson Fuel Pumps S-579 10-66
-
Tillotson HC-Series-Parts-List
-
Tillotson HD-4A 10-66
-
Tillotson HD-6A 8-66
-
Tillotson HD-Series-1-Parts-List
-
Tillotson HD-Series-2-Parts-List
-
Tillotson HE PartsList
-
Tillotson HJ-Series-Parts-List
-
Tillotson HL Carburetor Application Table
Third-party application table from Discount Marine Parts. Match the exact carburetor and model listed.
-
Tillotson HL Series 10-66
-
Tillotson HL Series Carburetors — Parts List, November 2004
-
Tillotson HL Series Export 10-66
-
Tillotson HR partsList
-
Tillotson HR Series 10-66
-
Tillotson HR Series S-578 11-66
-
Tillotson HS PartsList
-
Tillotson HS Series 10-66
-
Tillotson S-570 11-83
-
Tillotson S-570 2-63
-
Tillotson S-700C 2-65
-
Walbro Brochure
-
Walbro CAA Series
Original parts tables. Diagram images are unavailable.
-
Walbro HD Series
Original parts tables. Diagram images are unavailable.
-
Walbro HDA Series
Original parts tables. Diagram images are unavailable.
-
Walbro HDB Series
Original parts tables. Diagram images are unavailable.
-
Walbro HDC Series
Original parts tables. Diagram images are unavailable.
-
Walbro LMB Series
Original parts tables. Diagram images are unavailable.
-
Walbro LMJ Series
Original parts tables. Diagram images are unavailable.
-
Walbro LMK Series
Original parts tables. Diagram images are unavailable.
-
Walbro RJW Series
Original parts tables. Diagram images are unavailable.
-
Walbro SDC Carburetor Testing and Rebuilding
-
Walbro SDC Series
Original parts tables. Diagram images are unavailable.
-
Walbro SDC Series Carburetors — Parts List and Usage
-
Walbro WA Series
Original parts tables. Diagram images are unavailable.
-
Walbro WB Series
Original parts tables. Diagram images are unavailable.
-
Walbro WB Series Carburetor Service Manual
-
Walbro WG Series
Original parts tables. Diagram images are unavailable.
-
Walbro WGA Series
Original parts tables. Diagram images are unavailable.
-
Walbro WHG Series
Original parts tables. Diagram images are unavailable.
-
Walbro WHL Series
Original parts tables. Diagram images are unavailable.
-
Walbro WIP Series
Original parts tables. Diagram images are unavailable.
-
Walbro WJ Series
Original parts tables. Diagram images are unavailable.
-
Walbro WPF Series
Original parts tables. Diagram images are unavailable.
-
Walbro WS Series
Original parts tables. Diagram images are unavailable.
-
Walbro WT Series
Original parts tables. Diagram images are unavailable.
-
Walbro WTA Series
Original parts tables. Diagram images are unavailable.
-
Walbro WY Series
Original parts tables. Diagram images are unavailable.
-
Walbro WYF Series
Original parts tables. Diagram images are unavailable.
-
Walbro WYJ Series
Original parts tables. Diagram images are unavailable.
-
Walbro WYK Series
Original parts tables. Diagram images are unavailable.
-
Walbro WYL Series
Original parts tables. Diagram images are unavailable.
-
Walbro WYM Series
Original parts tables. Diagram images are unavailable.
-
Walbro WYP Series
Original parts tables. Diagram images are unavailable.
-
Walbro WZ Series
Original parts tables. Diagram images are unavailable.
-
WAseries
Walbro WA carburetor service manual.
-
WSseries
Walbro WS carburetor service manual.
-
WTseries
Walbro WT carburetor service manual.
-
Zama Cross Reference
Zama carburetor applications and cross-reference tables.
-
Zama Tech Guide
Parts & Interchange References 13
-
Cylinders, Piston Assemblies and Ring Sets — 1973
-
Cylinders, Piston Assemblies and Ring Sets — 58998B
-
Interchangeable Parts List - ADV 7007 Dec 1963
-
Interchangeable Parts List - IPL 7002 Sept 1959
-
Interchangeable Parts List - IPL 7003 Sept 1959
-
Mac 35A — IPL 52604, July 1958
-
McCulloch Production Dates and Publication References
-
McCulloch Publications Guide — 1991
-
McCulloch Publications Guide — 1998
-
Model 940 Earth Drill Attachment - IPL 60910 Aug 1963
-
Model 940 Earth Drill Attachment - IPL 60910A Aug 1965
-
Model 940 Earth Drill Attachment - IPL 60910A Nov 1963
-
Model 940 Earth Drill Attachment - IPL 63889 Mar 1966
Technical References 27
-
10-Series Oil Pump Clip Drawing
-
10-Series Oil Pumps — Reference Extract
-
1969 1970 Sabre Catalog
-
82cc McCulloch Parts Interchange — May 2014
-
Chain Sharpening Guide — 1962
-
Chainsaw Engine Fundamentals and Repair — 1964
-
Degree Wheel Template
-
Electronic CDI Ignition for McCulloch Kart and Saw Engines
-
Fuel Strainer B Series 4-54
-
Fuel Strainer DY-10A 7-52
-
Fuel Strainer DY-11A 3-59
-
Fuel Strainer DY-1A 6-53
-
Fuel Strainer DY-7A 4-54
-
Fuel Strainer DY-9C 2-54
-
Fuel Strainer e Series 5-63
-
J & F Chain Instruction Guide - 38023-1
-
MC-70 Engine Technical Report
-
McCulloch Bores, Strokes and Capacities — MacBob Reference
-
McCulloch Electric-Start Battery & Charging Reference
-
McCulloch Engine Degrees and Piston Travel Reference
-
McCulloch Ignition Timing Investigation
-
McCulloch Kart Engine Summary Sheet
-
McCulloch Spring Starter Aid Drawing
-
Oregon Saw Chain Maintenance — 1976
-
Saw Chain Maintenance — 1964
-
Small Gas Engines Repair — Roth, 1992
General small-engine mechanical reference.
-
Two-Stroke Tuners Handbook — Gordon Jennings
Catalogs & Advertisements 35
-
1968 Oregon Catalog
-
1982 Oregon Catalog
-
Chain Saw Attachments — 1966 Price List
-
Horstman Racing Equipment Advertisement
-
Mac 3200 Series Sales Brochure — 1993
-
Mac 5-10 Automatic — Swedish Sales Brochure
-
McCulloch 1-40 — Swedish Sales Brochure
-
McCulloch 1965 Model Saws Advertisement
-
McCulloch 1966 Sales Brochure
-
McCulloch Bars and Sprockets — ADV 511
-
McCulloch Chains, Bars and Sprockets — 1972
-
McCulloch Mac 15 - ADV 707 1964
-
McCulloch Mac 35A - ADV 701 1964
-
McCulloch Mac 35A - ADV 701 May 1960
-
McCulloch Model 1-41 - ADV 702 May 1960
-
McCulloch Model 1-42 - Advertisement and Specifications
-
McCulloch Model 1-51 - ADV 703 May 1960
-
McCulloch Model 1-61 - ADV 704 May 1960
-
McCulloch Model 1-71 - ADV 705 May 1960
-
McCulloch Model 1-81 - ADV 706 May 1960
-
McCulloch Model 250 - ADV 705 1964
-
McCulloch Model 300 - ADV 702 1964
-
McCulloch Model 450 - ADV 703 1964
-
McCulloch Model 640 - ADV 704 1964
-
McCulloch Model 790 - ADV 706 1964
-
McCulloch Model 99 - ADV 707 May 1960
-
McCulloch Reporter - December 1963
-
McCulloch Reporter - July-August 1964
-
McCulloch RS 25-A Attachment Brochure
-
McCulloch Super Pintail Chain — ADV 510
-
Mini Mac 25 Advertisement
-
Model 740 Advertisement — 1964
-
Model 890 Advertisement — 1964
-
Model 940 Advertisement — 1964
-
Pro Mac 700 and 10-10S Brochure — April 1992
Historical & Other Documents 3
-
McCulloch Company History — Jenn Feng
-
McCulloch Company Public Auction Brochure — 1999
-
Mini Mac fuel pump cover kit 88786
Document contributed by Parker Jameson
Undated factory service information sheet. No bulletin number is printed on this page.